|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MA4P290-1225T PIN Diode Quad Attenuator Features * 4 PIN diodes in a SOT-25 Plastic Package * Externally Selectable Bias and RF Matching Network * Lead-Free (RoHS Compliant) Equivalents Available with 260 C Reflow Compatibility * 5 - 3,000 MHz Useable Frequency Band * + 45 dBm IIP3 @ 1 GHz (50 ) * 2.8 dB Loss @ 1 GHz (50 ) * 36 dB Attenuation @ 1 GHz (50 ) Rev. V3 Package Outline (Topview) PIN 3 PIN 2 PIN 1 Topview PIN 4 PIN 5 Description and Applications M/A-COM's MA4P290-1225T & MADP-00716712250T RoHs equivalent product is a wideband, moderate insertion loss, high IP3, PIN Diode Quad Attenuator in a low-cost, surface mount SOT25 package. Four PIN Diodes in one package reduce circuit parasitics and improve circuit density. These PIN Diode Attenuators perform well where Variable RF Amplitude Control is required in 50 and 75 circuit applications. Wideband Attenuation Range, Frequency Flatness, and Input IP3 make these devices suitable for better power level control in RF Amplifiers. 1 PIN Configuration 2 PIN 1 2 3 Function RF INPUT Series Bias RF OUTPUT PIN 4 5 Function Shunt 1 Bias Shunt 2 Bias 2. RF INPUT and RF OUTPUT are Functionally Symmetrical Standard Part RoHs Equivalent Part MADP-007167-12250T Absolute Maximum Ratings @ 25 C Parameter Operating Temperature Storage Temperature (0 mW Dissipated Power) Junction Temperature DC Voltage at Temperature Extremes DC Current per diode Mounting Temperature MA4P290-1225T Absolute Maximum -65 C to +125 C -65 C to +150 C +175 C l -200 V l 200 mA +235 C for 10 seconds 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode Quad Attenuator Electrical Specifications @ 25 C Parameter Reverse Current (IR) Capacitance (CT) Resistance (RS) Resistance (RS) Resistance (RS) Minority Carrier Lifetime (TL) I Region Width Rev. V3 Condition Vr = 200 V F = 1 MHz, V = 50 V F = 100 MHz, I = 1 mA F = 100 MHz, I = 10 mA F = 100 MHz, I = 100mA IF = 10 mA Unit A pF S m Typical Max. 10 .20 85 11 3 2.7 175 .30 16 Typical 50 SOT-25 RF Performance @ +25 C using Wide Band RF Circuit Design ( Values Shown include Through Loss Calibrated Out of RF Test Circuit ) Parameter Insertion Loss Frequency Range 50 - 3,000 MHz Test Conditions 13 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz 13 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz 0 mA / Series Diode and 3.7 V Shunt 1 and 2 Bias F = 1 GHz 0 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 1010 MHz, F2 = 1020 MHz + 10 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 1010 MHz, F2 = 1020 MHz 0 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 110 MHz, F2 = 120 MHz + 10 V / Series Diode and 3.7 V Shunt 1 and 2 Bias F1 = 110 MHz, F2 = 120 MHz Within 1 dB of Final Attenuation Value F = 1 GHz 0 - 20 V Series Diode Bias and 3.7V Shunt 1 and 2 Bias Units dB Min. Typ. -2.8 Max. Return Loss 50 - 3,000 MHz dB -15 Attenuation 50 - 3,000 MHz dB -36 Input IP3 50 - 3,000 MHz dBm 45 Input IP3 50 - 3,000 MHz dBm 43.5 Input IP3 50 - 3,000 MHz dBm 43.5 Input IP3 50 - 3,000 MHz dBm 39 Settling Time RF C.W. Incident Power 50 - 3,000 MHz 50 - 3,000 MHz uS dBm 10 + 20 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode Quad Attenuator Typical Diode Performance Curves Series Resistance vs. Bias Current 1 Total Capacitance vs. Reverse Voltage Rev. V3 1000.00 Total Capacitance (pF) 100.00 100 MHz 1.0 GHz 10.00 1.00 0.10 0 20 40 60 80 100 0.1 0.1 1 10 100 Reverse Voltage (V) Bias Current (mA) Typical Attenuator Performance INP IP vsV LT E UT 3 O AG 50.00 IP3 (dBm) 40.00 30.00 20.00 10.00 0.00 0 10 20 V oltage(V ) 30 40 100M z H 1000M z H 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode Quad Attenuator Typical Attenuator Performance ATTENUATIO N vs. FREQUENCY 0.00 Rev. V3 -10.00 -20.00 -30.00 -40.00 0 volts 1 volt 4 volt 10 volt 20 volt 40 volt Attenuation (dB) -50.00 -60.00 -70.00 5.00E+07 5.50E+08 1.05E+09 1.55E+09 Frequen cy (Hz) 2.05E+09 2.55E+09 ATTENUATION FLATNESS vs. FREQUENCY 0.2 0.2 0V 0.1 1V 4V 10V 20V 40V Flatness (dB/MHz) 0.1 0.0 0.0 0.00E+0 5.00E+0 1.00E+0 1.50E+0 Frequency (Hz) 2.00E+0 2.50E+0 3.00E+0 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode Quad Attenuator Rev. V3 RETURN LOSS vs. FREQUENCY 0.00 -5.00 -10.00 -15.00 0 volt 1 volt 4 volt 10 volt 20 volt 40 volt Return Loss (dB) -20.00 -25.00 5.00E+07 5.50E+08 1.05E+09 1.55E+09 Frequency (Hz) 2.05E+09 2.55E+09 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MA4P290-1225T PIN Diode Quad Attenuator Functional Schematic PIN 2 Series Bias Rev. V3 PIN 3 RF Out PIN 1 RF In PIN 4 Shunt 1 Bias PIN 5 Shunt 2 Bias SOT-25 Case Style 1225 Dim Min. A B C D E F G H J .1103 .1023 0.0355 0.0591 Inches Max. .1181 .1181 .0512 .0669 Millimeters Min. 2.80 2.6 0.9 1.5 Max. 3.10 3.00 1.30 1.70 .0374 REF. .0138 .0031 .0002 .0138 .0197 0.0079 .0059 .0216 0.95 REF. .35 .08 .05 .35 .50 0.2 .15 .55 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MA4P290-1225T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |